|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
UF4001 - UF4007 Discrete POWER & Signal Technologies UF4001 - UF4007 Features * * * * Low forward voltage drop. High surge current capability. High reliability. High current capability. 1.0 min (25.4) Dimensions in inches (mm) 0.205 (5.21) 0.160 (4.06) DO-41 COLOR BAND DENOTES CATHODE 0.107 (2.72) 0.080 (2.03) 0.034 (0.86) 0.028 (0.71) 1.0 Ampere Glass Passivated High Efficiency Rectifiers Absolute Maximum Ratings* Symbol IO if(surge) TA = 25C unless otherwise noted Parameter Average Rectified Current .375 " lead length @ TA = 75C Peak Forward Surge Current 8.3 ms single half-sine-wave Superimposed on rated load (JEDEC method) Total Device Dissipation Derate above 25C Thermal Resistance, Junction to Ambient Thermal Resistance, Junction to Lead Storage Temperature Range Operating Junction Temperature Value 1.0 Units A 30 2.08 17 60 15 -65 to +150 -65 to +150 A W mW/C C/W C/W C C PD RJA RJL Tstg TJ *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Electrical Characteristics Parameter TA = 25C unless otherwise noted Device 4001 4002 100 70 100 4003 200 140 200 4004 400 280 400 10 50 50 1.0 17 75 1.7 4005 600 420 600 4006 800 560 800 4007 1000 700 1000 50 35 50 Units V V V A A nS V pF Peak Repetitive Reverse Voltage Maximum RMS Voltage DC Reverse Voltage (Rated VR) Maximum Reverse Current TA = 25C @ rated VR TA = 100C Maximum Reverse Recovery Time IF = 0.5 A, IR= 1.0 A, IRR = 0.25 A Maximum Forward Voltage @ 1.0 A Typical Junction Capacitance VR = 4.0 V, f = 1.0 MHz (c)1999 Fairchild Semiconductor Corporation UF4001-UF4007, Rev. A UF4001 - UF4007 Typical Characteristics Forward Characteristics 1.6 FORWARD CURRENT (A) FORWARD CURRENT (A) 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 SINGLE PHASE HALF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD .375" (9.00mm) LOAD LENGTHS Forward Characteristics 10 TJ = 25 C A Pulse Width = 300S 2% Duty Cycle 1 0.1 UF4001-UF4003 UF4005-UF4007 0.01 UF4004 25 50 75 100 125 150 AMBIENT TEMPERATURE ( C) 175 0.001 0.2 0.4 0.6 0.8 1 1.2 FORWARD VOLTAGE (V) 1.4 Non-Repetitive Surge Current PEAK FORWARD SURGE CURRENT (A) 40 REVERSE CURRENT ( A) 1000 Reverse Characteristics 30 100 TA = 125 C 20 10 10 1 T J = 25 C A 0 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Typical Junction Capacitance 60 JUNCTION CAPACITANCE (pF) 50 40 30 UF4001-UF4003 20 UF4004-UF4007 10 0 0.1 0.5 1 2 5 10 20 50 100 REVERSE VOLTAGE (V) 500 50 NONINDUCTIVE 50 NONINDUCTIVE +0.5A (-) trr DUT 50V (approx) 50 NONINDUCTIVE Pulse Generator (Note 2) (+) OSCILLOSCOPE (Note 1) 0 -0.25A NOTES: 1. Rise time = 7.0 ns max; Input impedance = 1.0 megaohm 22 pf. 2. Rise time = 10 ns max; Source impedance = 50 ohms. -1.0A 1.0cm SET TIME BASE FOR 5/ 10 ns/ cm Reverse Recovery Time Characterstic and Test Circuit Diagram UF4001-UF4007, Rev. A TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM CoolFETTM CROSSVOLTTM E2CMOSTM FACTTM FACT Quiet SeriesTM FAST(R) FASTrTM GTOTM HiSeCTM DISCLAIMER ISOPLANARTM MICROWIRETM POPTM PowerTrenchTM QSTM Quiet SeriesTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 TinyLogicTM FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. |
Price & Availability of UF4007 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |